Designed as a small, easy-to-carry device that can be put in your pocket
The full-auto range has been adopted to eliminate the need of selecting a range !



Slim jaws with width of approximately 9 mm are used to enable the user to easily clamp the conductive wire under measurement among densely routed conductive wires.

• Back light has been adopted to use in the dark place.
• A lever and buttons are laid out in positions where they can be handled with a single hand.
• The use of a large data hold button with a good click feel enables the user to press the button even in an overhead or other location where the button is not viewable during measurement and to check the measured value later.
• The use of a portrait type LCD with a backlight provided in the lower part allows the user to read the displayed value while holding the meter.
• Its rear has been curved so that the clamp meter can be held comfortably in the palm.