| Specifications |
| CRT |
| Type |
6-inch rectangular type
with internal graticule
8 x 10 div (1div=1cm) |
| Accelerating Potential |
2kV |
| Z-axis input |
Input Impedance: Approx. 5k£[
Sensitivity: Above 3Vp-p
Bandwidth: DC ~ 5MHZ |
| Polarity |
Positive-going input decrease |
| Focus Control |
Auto focus |
| FUNCTION GENERATOR |
| Frequency Range |
0.1HZ ~ 1MHZ (7 range) |
| Waveform |
Sine Wave, Square Wave, Triangle
Wave |
| Frequency Variable
Range |
10:1 or more |
| Output Impedance |
50£[¡Ó10% |
| Voltage |
Over 14Vp-p(open circuit) continuous
conversion
DC offset possible over¡Ó6V when open |
| Sinewave Distortion |
2% Max. (10HZ ~ 100KHZ) |
| Squarewave Unsymmetry |
¡Ó3% or less (in 1
KHZ maximum) |
| Squarewave Rise/Fall Time |
50£[ output: 120ns or less |
| VERTICAL SYSTEM |
| Sensitivity |
5mV/div~5V/div¡Ó3%,
1mV/div~1V/div¡Ó5% (using x5MAG) |
| Bandwidth |
DC to 20MHZ (x 5MAG.:DC to 7MHZ) |
| Rise Time |
Approx. 17.5ns (x 5MAG. :Approx.
50ns) |
| Max. Input |
300V (DC+ACpeak) at 1KHZ |
| Input Coupling |
AC, DC, GND |
| Input Impedance |
Approx. 1M£[// 25pF |
| Vertical Mode |
CH1,CH2,DUAL(ALT,CHOP),ADD,CH2 INV |
| HORIZONTAL
SYSTEM |
Sweep Time
|
0.2µs/div ~ 0.5s/div¡Ó3%
(¡Ó5% at x10 MAG) |
| Max. Sweep Rate |
100ns/div (20ns and 50ns/div are
uncalibrated) |
| TRIGGER |
| Trigger Mode |
AUTO, NORM, TV-V, TV-H |
| Trigger Source |
CH1, CH2, ALT, LINE, EXT |
| Trigger Slope |
"+" or "-" |
| X-Y OPERATION |
| Sensitivity |
5mV ~ 5V/div¡Ó4% |
X-axis Bandwidth
|
DC ~ 500KHZ |
| Phase Error |
3¢X or less from DC ~ 50KHZ |
| OUTPUT SIGNAL |
Trigger Signal Output
|
Voltage: approx. 20mV/div into 50£[
Bandwidth : 50HZ to 5MHZ (-3dB)
Impedance : Approx.50£[ |
| Calibrator Output |
1KHZ Square wave, 2Vp-p¡Ó2% |
| POWER SOURCE |
| |
AC 115/230V¡Ó15%, 50/60HZ |
| ACCESSORIES |
| |
Instruction manual x 1
Power cord x 1
GCP-210LC Probes(10:1/1:1)x2
GTL-101 x 1 |
| DIMENSIONS
& WEIGHT |
| |
310(W) x 150(H) x 455(D)mm
Approx. 8.5kg |
