| Specifications |
| CRT |
| Type |
6-inch rectangular
type with internal graticule
0%, 10%, 90% and 100% markers.
8 x 10 div (1div=1cm) |
| Accelerating Potential |
12kV |
| Illumination |
Continuously adjustable |
| Z-axis input |
Input Impedance: Approx.
5k£[
Sensitivity:Above 3Vp-p
Bandwidth:DC ~ 5MHZ |
| VERTICAL SYSTEM |
| Sensitivity |
5mV/div ~ 5V/div¡Ó3%,1mV
~ 2mV/div¡Ó5% |
| Bandwidth |
DC ~ 50MHZ
DC ~ 15MHZ at 1 ~ 2mV/div |
Rise Time
|
7ns (23.3ns for 1 ~
2mV/div) |
| Signal Delay |
leading edge can be
monitored |
Input Impedance
|
Approx. 1M£[ |
Input Coupling
|
AC, DC, GND |
| Vertical Mode |
CH1, CH2, DUAL, ADD,
CH2 INV
(Dual automatic switching ALT and CHOP) |
| HORIZONTAL
SYSTEM |
| A(main) Sweep Time |
0.1µs ~ 0.5s/div¡Ó3%
100ns ~ 50ms/div¡Ó5% (x 10 MAG)
10ns ~ 50ns¡Ó8% (x 10 MAG) |
| B(delay) Sweep Time |
0.1µs ~ 0.5ms/div¡Ó3%
100ns ~ 50µs/div¡Ó5% (x 10 MAG)
10ns ~ 50ns/div¡Ó8% (x 10 MAG) |
| Delay Time |
1µ s ~ 5ms, 5% |
| Delay Time Jitter |
Better than 1:10000 |
| TRIGGER |
| Trigger Mode |
AUTO, NORM, SINGLE |
| Trigger Source |
CH1, CH2, ALT, LINE,
EXT |
| Trigger Coupling |
AC, DC, HF REJ, TV |
| Trigger Slope |
"+" or "-" |
| X-Y OPERATION |
| Sensitivity |
5mV ~ 5V/div¡Ó4% |
| X-axis Bandwidth |
DC ~ 2MHZ |
| Phase Error |
3¢X or less from
DC ~ 100KHZ |
| OUTPUT SIGNAL |
| Trigger Signal Output |
Voltage: approx. 50mV/div
into 50£[ |
| Calibrator Output |
1KHZ Square wave, 2Vp-p¡Ó2% |
| POWER SOURCE
|
| |
AC 100V/120V/220V/230V¡Ó10%,
50HZ/60HZ |
| ACCESSORIES |
| |
Instruction manual x
1,
Power cord x 1,
GLF-190C Probes (10:1/1:1) x 2 |
| DIMENSIONS
& WEIGHT |
| |
310(W) x 150(H) x 455(D)
mm;
Approx. 8.2kg |
|
