|
|
 |
|
MG1000/MG500/MG125: Digital 2 ranges & AC voltage measurement
|
 |
| General Information |
- Allows you to measure insulation resistance
more safely by avoiding operation mistakes!!
- Hot-line
state detection
In any range (M© ), the hot-line state (30 V
minimum) can be detected through the buzzer
sound and the red LED illumination. If you press
the MEASURE button by mistake in this state, no
test voltage will be generated. Thus, the
measuring circuit and the equipment involved
will not be affected adversely.
- Large bolt
mark
During the measurement of M© , a large bolt mark
is illuminated on the LCD with the buzzer sound,
allowing you to find that voltage is generated.
- More
ingenuity
To select the highest test voltage range, you
need to turn the rotary switch while holding
down the 0© ADJ button. This design feature
prevents the highest test voltage from being
generated by an operation mistake.
- Easy to use &
tough body
An easy-to-hold body with a portrait design has
been adopted to ensure stable measurements. The
tester comes with a strap, and uses less
slippery elastomeric material for its lateral
sides so that the user can grip the tester more
firmly.
- Automatic
data hold
After measurements have been finished, the last
measured value can be held automatically. Unlike
an analog tester, you do not need to check the
reading during measurements and therefore can
comfortably concentrate on the object under
measurement.
- barograph just
like analog meter
A large logarithmic bar graph is provided to
enable the user to check the measured value like
using an analog tester.
- Large display
with backlight
The backlight allows you to check the measured
value even in a dark place. Since the rated
voltage output can be checked with the green
LED, you can find whether the measurement is
being carried out properly.
 |
|
|
|
